A water based polymer coating which offers years of UV-protection, grime, soot, salt, water stains, dust and pollution. This surface coating is so much more than just shiny!
Wipe or spray the sealant onto the prepared surface. Please see step by step instructions for proper use.

For paint in good condition you need about 4 ml/ sqmtr when applied with a spray/trigger bottle. Less if you wipe it on.

Is your aircraft new or just been painted? Coat it now ! Keep it looking like new!

Re-painting an aircraft is a cumbersome and expensive exercise. If you start to think about a re-paint, it is time to get one of our skilled applicators to look at the aircraft. Chances are that the paint job can be restored.

“Cutting” dull paint back to a shiny surface is better left to the professionals. When this stage of the work is completed, you can either have short lived “wax” applied, which will not stop the UV, but cause you to order the same work soon again.
But if you opt for a “Cut” followed by a SealX application, paint degradation from UV is stopped for at least a year. Grime, soot and flies are easily removed. Using suitable washes, the upkeep of your aircraft will be faster, cheaper  and easier than ever before.
Retain the value of your aircraft, extend the life of the paint and enjoy a clean, representable aircraft at the same time.

N.B
To prep SealX coated areas for a re-paint, you will need to thoroughly remove SealX with Wax and Grease Remover.

A water based cleaner used to prepare all surfaces including all paints, all plastics, glass, alloy, stainless, porcelain, fibreglass and gel coat for the application of SealX Sealant.

Aviation:
A 4 seater aircraft would typically need about 1 ltr of SealX Primer to prepare it for the application of SealX Sealant. Spray on and let it do the job ! Especially on sooty areas.

Wipe off to a clean surface, repeat the process if necessary. What you see is what you seal afterwards !

Please note that SealX Primer can not replace cutting compound used to polish dull surfaces back to a shine. SealX Primer removes previously applied wax, exhaust soot, grub, finger marks, flies and grime. Not oxidisation.

SealX Primer works very well in the cargo hold and cockpit as well. 

Drywash is for all your cleaning needs. It cuts through grime, soot, diesel, fat and ingrown dirt. Spray on and let it do it’s work for a few minutes before wiping it off to a clean shine.
It then brings a lasting shine and makes for a dirt-repellent surface.
Drywash will also work well against fingerprints on glass and interior. Ideal on vinyl and leather seats, plexiglass, rubber and plastics.
Drywash does NOT remove previous applications of SealX Sealant. The product works really well on glass, all paints including Durlon, 1-pot and 2-pot, Acrylic and water based or thinner based paint.

A high quality SealX Wash concentrate. Suitable for all vehicles, aviation, yachts and agriculture. For all paint work, bright work, stainless steel and varnished surfaces. Produces a streak free, high gloss, beading finish. Bio degradable. Nonb hazardous.

SealX Finishing Swirl Mark Remover This Finishing compound gives a deep, long lasting shine. Offering supreme UV resistance even under the New Zealand and Australian sun for some 6 months. Much easier and faster to apply than traditional waxes.
Unlike the classic Canuba Wax or silicone based products, this product can be used in strong sunlight. The same glossy, dirt repellent finish is achieved when used on cars, aircrafts, yachts, Perspex, Plexiglass, Lexan, Clears, GRP, and all plastics.
We guarantee it to work on Strataglass as well. Plexiglass windows on campers or boats, clears on yacht-biminis and convertible cars will become so much more transparent again as the product fills in the micro scratches we perceive as “milkyness”. Dull, milky, faded head lights will vastly improve their looks and transparency when treated with SealX finishing compound. Machine or Manual application.

SealX Medium Cutting. SealX Cut and polish If you are a handy person and feel you are ready to tackle dull areas, choose one of the below “cut and polishes”.

They are all compatible with the SealX Sealant, the Primer and the Drywash. If the drywash didn’t remove the dullness, maybe it’s time for something stronger? Call if you need help to specify your requirements.

Remember to keep moving with the buffing pad, NEVER lean into the surface real hard. NEVER let the spot you are working on heat up. ALWAYS make sure the surface is kept moist. ALWAYS make sure you have a secure stand when working with polishing machines. Those machines sometimes want to get away from you!

REJEX 16 oz Protects and beautifies acrylic windows, painted surfaces, Perspex, Lexan, plastics and polished metal surfaces. Gives a stunning, deep shine. RejeX is not meant to be used on porous surfaces, highly oxidized painted surfaces, or to fill deep scratches. Coating lasts 6-8 months in the australian and nz sun. 

To protect and water proof all interior and exterior fabrics but also leather shoes, jackets, caps, boat covers, horse blankets and car seats. Does not change colour or appearance of the surface.

Application:
Simply spray lightly on clean, dry fabrics or shoes. Allow to dry. Hazards: No significant hazard. Avoid breathing spray, wear of dust-mask recommended during application. Allow adequate ventilation. Use only from container. Do not smoke during application. Keep away from children.

To restore exterior and interior plastics and rubber to their original look and colours.
The looks of faded and UV-worn plastics spring back to life and become water and dirt repellent. Greatly enhances the vehicle presentation for months to come.

Application:
Wash surfaces to remove dirt and grime. Let dry. Apply product in circular motion. Use product neat by wiping or spraying on at even application. Just leave to dry. Repeat application on heavily worn or UV damaged surfaces to reach saturation and “even” appearance.

Cautions:
It will not harm paintwork glass or chrome. But it does contain silicone so do not spray it in paint shop areas. Use brush or wipe on instead. N.B. Vinyl can also be pre-cleaned using the Multipurpose degreaser.